1.800.54.EXTEC (543.9832)  |  About
   

EXTEC ® Labcut 1010 - Low Speed Diamond Saw Catalog# 10010

EXTEC LABCUT 150 Variable Speed, 3" - 6", includes: 10015 Screw Holder for irregular samples, set of 3 weights, tools and digital rpm indicator, 10153 splash guard and 12050 cutting fluid.

NOTE: The Labcut 1010 has been discontinued.
Please see the all new Labcut 150…

The EXTEC Labcut 1010 Low Speed Diamond Saw is a convenient preparation instrument in the laboratory and is designed for the precision cutting of a wide variety of materials. Samples can be cut with minimal damage and deformation. The universal design cuts fragile and soft materials that cannot be handled by standard high speed cutoff machines. Variable wheel rotation speeds range from 0 to 500 rpm for precise cutting. A variety of sample holders are available, making the Labcut 1010 even more versatile. This includes the rapidcut precision attachment which reduces the cutting time and gives a high quality surface finish.

The Labcut 1010 is fabricated from a Cast-Aluminum Frame with stainless steel components which provides stability and corrosion resistance. The drive is transmitted to the wheel shaft from an advanced 1/10 HP belt driven motor. The sample arm is pivoted and can be counter-balanced to give low loading conditions on the specimen. It features a 25mm micrometer movement that allows positioning of the sample with respect to the wheel. A convenient, Front-Loading, Lubricant Tray is easily accessible and has an external tray which can be set for 3 inch, 4 inch, 5 inch, or 6 inch wheels.

The Labcut 1010 will accept 3 inch (75mm), 4 inch (100mm), 5 inch (125mm), and 6 inch (150mm) diameter EXTEC Diamond Wafering Blades. Wheel clamps provide rigid support to these thin blades. A splash guard safety shield covers the rotating diamond wafering blade. If this is removed the machine will shut down.

An end point microswitch with associated indicator can be set to terminate the cutting process at a predetermined depth. The wheel rotation can be varied from 0 to 500 rpm.

A digital rpm indicator with variable speed control allows the operator to set a precise, repeatable cutting speed irrespective of wheel size, thickness of material and specimen loading.

  • Materials: Slicing samples of metals, alloys, composites.
  • Ceramics: Slicing samples of ceramics.
  • Semiconductor: Cutting semiconductor crystals and sectioning embedded devices.
  • Pathology: Cutting bone and teeth material and preparing thin sections. Cutting embedded tissue.
  • General Physics: Mounting and slicing single crystals along a particular axis.
  • Geology: Preparing mineralogical sections of rocks.
  • Paleontology: Preparing sections of fossils in rocks.
  • Motor:
    • 1/10 HP DC Motor Available in 115 or 220 Volt.
  • Wheel Shaft:
    • 1/2" (12.7mm) diameter double bearing, adjustable to eliminate lateral movement.
  • Wheel Speed:
    • Variable speed between 0 and 500 rpm.
  • Specimen Holder:
    • Counter-balanced holder with set of 3 weights.
    • Micrometer for lateral movement 0-25 mm.
    • Standard specimen holder provided.
  • Wheel Size:
    • 3" (75mm), 4" (100mm), 5" (125mm), 6" (150mm) wheels used as standard.
  • Lubricant Reservoir:
    • Front loading tray which is raised and fixed when in position.
  • End Point:
    • A microswitch for stopping the cutting process at a preset depth. Can be adapted to all wheel sizes.
  • Dimensions:
    • Width: 12" (300mm)
    • Height: 7 1/4" (185mm)
    • Depth: 12" (300mm)
  • Weight:
    • 40 lbs (18kg)
C-K:
Fast, convenient and economical, the C-K (Clear-Kling) System uses a revolutionary clear backing that allows adhesion without adhesives. C-K discs can be applied to any platen. Select your desired C-K cloth, abrasive disc or diamond lapping film and apply to platen - it instantly adheres. When finished just lift and replace with the next item. C-K discs stay on the platen and may be used repeatedly. Available on a variety of Extec products.
PSA:
PSA (Pressure Sensitive Adhesive) backing that is oil, water & alcohol resistant.
Cloth:
Cloth backing is available for most products.
Plain:
Plain backing is available for most products.
Poly Back:
Extec Poly backing.
Maxima:
Non-metallic, magnetic compatible backing.
Organize Products By:
Catalog # Unit Size Description  
10015
Each  EXTEC Screw Holder for Irregular Samples
10020
Each Small EXTEC V-Block Holder Small
10022
Each Large EXTEC V-Block Holder Large
10024
Each  EXTEC Double Clamp Holder
10026
Each 1" to 1/4" (25-35mm) EXTEC 1" to 1/4" (25-35mm) Cylindrical Holder
10028
3 discs  EXTEC Ceramic Disc Holder with 3 Discs
10030
Each 1 1/2" x 1" (38mm x 25mm) EXTEC Mounting Plate 1 1/2" x 1" (38mm x 25mm)
10031
Each 1 1/2" (38mm) diameter EXTEC Mounting Plate 1 1/2" (38mm) dia.
10032
Each 1" (25mm) diameter EXTEC Mounting Plate 1" (25mm) dia.
10034
Pkg/5 3/4" (19mm) diameter EXTEC Mounting Stubs 3/4" (19mm) dia. Pkg/5
10035
Each  EXTEC PCB Holder
10047
New
Each  EXTEC Vacuum Chuck Complete with Vacuum Pump
10048
Each  EXTEC Vacuum Chuck (requires Vacuum Pump, see item 10049)
10049
Each  EXTEC Vacuum Pump (F/10048 EXTEC Vacuum Chuck 110V)
10050
Each  EXTEC Rapidcut Precision Attachment
Discontinued
10052
Each  EXTEC Special Coolant Tray
10038
Each  EXTEC Tiltable 45° Plate Holder
Discontinued
10040
Each  EXTEC Rotational Holder
10042
Each  EXTEC 2 Axis Goniometer for Crystals
10043
Each  EXTEC Splash Safety Shield
Key:
  • New New
  • Special Packaging Special Packaging
Pricing found on www.extec.com is U.S. only.